TLC5944PWPG4
| Parameters | |
|---|---|
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 28 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Pin Count | 28 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 3.958W |
| Nominal Supply Current | 60mA |
| Power Dissipation | 3.958W |
| Voltage - Output | 15V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLC5944PWPG4 Overview
To save board space, it uses the HTSSOP EP package. The system operates on the basis of the frequency 30MHz.It operates using 28 terminations.There are 28 pins on the base of this LED driver.16 segments are present.Ideally, the supply voltage should be 5.5V.Its output voltage is 15V.The device has 28 pins.The Display Drivers is also assigned based on its characteristics.With a minimum input voltage of 3V volts, it can operate.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 3V.The allowable maximum value of supply current reaches 5.5V.It is important not to exceed 85°C in order to ensure stable operation.As a condition for achieving stable operation, the operating temperature should be greater than -40°C.The interface IC that the part is equipped with is indicated by LED DISPLAY DRIVER.
TLC5944PWPG4 Features
Available in the HTSSOP EP package
Frequency of 30MHz
Supply voltage of 3.3V
TLC5944PWPG4 Applications
There are a lot of Texas Instruments TLC5944PWPG4 LED Driver ICs applications.
- Portable lighting
- Panel lighting
- Down lights
- LED backlight driver for LCD displays for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- A- lamps
- LED backlight driver for LCD displays for Tablets and Note PCs
- Scanners and Handy Terminals
- Other Electronic Devices
