TLC5944RHBT
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 30MHz |
| Base Part Number | TLC5944 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Interface | Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Power Dissipation | 3.482W |
| Output Current | 60mA |
| Max Supply Current | 60mA |
| Voltage - Output | 3V~15V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Switching Frequency | 33MHz |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.482W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
TLC5944RHBT Overview
Space is saved using its 32-VFQFN Exposed Pad package. LED drivers designed using this technology use 16 outputs.It is possible to mount the led driver using Surface Mount.As a Linear, it has high efficiency and reliability.-40°C~85°C TA is the operating temperature and it works fine.As a result, Signage is likely to benefit greatly.In the 30MHz frequency range, it operates.In this case, it operates with terminations of 0.It is configured with 32 pins as its base.The number of segments is estimated to be 16.TLC5944 is the base part number for this LED driver.5.5V is a maximum acceptable voltage for the supply.3V~15V is the voltage output.In this device, there are 32 pins.Additionally, it is categorized into Display Drivers according to its characteristics.It operates with the minimal input voltage of 3V.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.In terms of supply current, there is a maximum value of 5.5V.As long as the maximum supply current is less than 60mA, this device is capable of providing high efficiency.60mA is the maximum current the load can handle.The electronic component can fully perform its functions if the switching frequency is maintained at 33MHz.
TLC5944RHBT Features
Available in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 3.3V
Switching frequency of 33MHz
TLC5944RHBT Applications
There are a lot of Texas Instruments TLC5944RHBT LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- Sports Facility Lighting
- LED headlights
- Architectural lighting
- Street lighting
- Medical surgery lighting
- Gallery lighting
- Down lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Portable lighting
