TLC5945PWPG4
| Parameters | |
|---|---|
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 28 |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Pin Count | 28 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Current - Output | 80mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1.15mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLC5945PWPG4 Overview
The HTSSOP EP package is used for saving board space. A frequency of 30MHz is used to operate it.There are 28 terminations associated with it.In this LED driver, the base is configured as 28.There are estimated to be 16 segments.As a maximum value, 5.5V is acceptable.There is 17V voltage output from it.In addition, it has 28 pins.In addition to Display Drivers, it is also classified by its characteristics.The minimal input voltage is 3V.As a result, it is designed to operate at a minimal voltage of 3V to ensure the most efficiency possible.When the maximum supply current is allowed, the value reaches 5.5V.In order to maintain maximum efficiency, the supply current cannot exceed 60mA.Temperatures should not exceed 85°C in order to ensure stable operation.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.In this part, LED DISPLAY DRIVER represents the interface IC.The interface IC that the part is equipped with is indicated by 80mA.
TLC5945PWPG4 Features
Available in the HTSSOP EP package
Frequency of 30MHz
Supply voltage of 5V
TLC5945PWPG4 Applications
There are a lot of Texas Instruments TLC5945PWPG4 LED Driver ICs applications.
- LED backlight driver for LCD displays for portable equipment
- Portable lighting
- Stage Lighting and Signage
- Flicker-free LED Lighting using R1580N
- Museum lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Replacement lamps
- Refrigeration lighting
- Scanners and Handy Terminals
- Street lighting
