TLC5946PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight, Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.958W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC5946 |
| Pin Count | 28 |
| Number of Outputs | 16 |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 45mA |
| Power Dissipation | 3.958W |
| Output Current | 40mA |
| Max Supply Current | 45mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 5mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5946PWP Overview
Save board space with 28-PowerTSSOP (0.173, 4.40mm Width) package. For the design of these LED drivers, 16 outputs are used.This mounting method is Surface Mount.It emerges as a Linear with high efficiency.At -40°C~85°C TA, the led driver is capable of operating.There are many benefits for Backlight, Signage.28 terminations are used in its operation.The base of this board is configured as 28 pins.The number of segments is estimated to be 16.This LED driver has the part number TLC5946.It is acceptable to supply voltages of 5.5V volts.The voltage at the output terminal is 17V.The device has 28 pins.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.A minimal input voltage of 3V is required for it to operate.For highest efficiency, it works with a minimal supply voltage of 3V.It reaches 5.5V when the maximum supply current is allowed.Its high efficiency is based on the fact that the maximal supply current should not exceed 45mA.Loads can only be powered by 40mA current.When the switching frequency is maintained at 30MHz, this electronic component is able to fully play its functions.The maximum output current of 40mA allows it to deliver all benefits of a LED driver.
TLC5946PWP Features
Available in the 28-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
TLC5946PWP Applications
There are a lot of Texas Instruments TLC5946PWP LED Driver ICs applications.
- Linear fluorescent
- Other Electronic Devices
- OLED power supply for portable equipment
- Stage and Studio lighting
- Auxiliary lights for on-vehicle cameras
- LED headlights
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED Lighting PFCs, Linear Dimmable
- A- lamps
- General lighting
