TLC5946PWPG4
| Parameters | |
|---|---|
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 28 |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Pin Count | 28 |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 3.958W |
| Nominal Supply Current | 45mA |
| Power Dissipation | 3.958W |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 5mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLC5946PWPG4 Overview
HTSSOP EP package saves space on the board. The frequency of 30MHz is used as the basis for its operation.For its operation, terminations with a value of 0 are used.The configuration of the board is built around 28 pins.A total of 16 segments are estimated.5.5V is an acceptable maximum value for the supply voltage.It produces a voltage of 17V volts.28 pins are available on the device.According to its characteristics, it is also categorized into Display Drivers.At a voltage of 3V, it operates at a minimal input voltage.A minimal supply voltage of 3V is required for it to achieve the highest efficiency.In the event that the maximum supply current is allowed, it reaches 5.5V.For stable operation, the operating temperature should not exceed 85°C.Stable operation requires an operating temperature greater than -40°C.A LED driver that operates at 40mA output current provides all the benefits of a LED driver.In the case of this part, LED DISPLAY DRIVER identifies the interface IC.
TLC5946PWPG4 Features
Available in the HTSSOP EP package
Frequency of 30MHz
Supply voltage of 3.3V
TLC5946PWPG4 Applications
There are a lot of Texas Instruments TLC5946PWPG4 LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Architectural lighting
- Down lights
- Flicker-free LED Lighting using R1580N
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Gallery lighting
- Amusement Machines
- Constant Voltage Power Source for portable equipment
- Medical surgery lighting
- Refrigeration lighting
