TLC5948ADBQ
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 33MHz |
| Base Part Number | TLC5948 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 18mA |
| Output Current | 60mA |
| Max Supply Current | 3mA |
| Voltage - Output | 10V |
| Topology | Shift Register |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
TLC5948ADBQ Overview
As a result of its 24-SSOP (0.154, 3.90mm Width) package, it helps to save board space on the board. For the design of these LED drivers, 16 outputs are used.It is possible to mount the led driver using Surface Mount.Initially, it emerges as a Linear with high efficiency and a high degree of reliability.-40°C~85°C TA is the operating temperature and it works fine.As a result, Signage is likely to benefit greatly.The frequency of 33MHz determines how it operates.A termination of 24 is used to operate the LED driver.This module has 24 pins as its base.It is likely that undetermined failures will occur if the voltage supply is less than 3V.It is estimated that there are 16 segments.There is a mounting of it by Surface Mount.It's under the TLC5948 base part number.5.5V is a reasonable voltage.A voltage of 10V is produced by it.Furthermore, it can be categorized as Display Drivers based on its characteristics.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 3V.It is capable of delivering high efficiency when the maximal supply current is below 3mA.The current that can be supplied to the load is 60mA.
TLC5948ADBQ Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 33MHz
Supply voltage of 3.3V
TLC5948ADBQ Applications
There are a lot of Texas Instruments TLC5948ADBQ LED Driver ICs applications.
- Linear fluorescent
- Amusement Machines
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Gallery lighting
- General lighting
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage and Studio lighting
- Constant Voltage Power Source for portable equipment
- Scanners and Handy Terminals
