TLC5948ADBQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 33MHz |
| Base Part Number | TLC5948 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 18mA |
| Output Current | 60mA |
| Max Supply Current | 3mA |
| Voltage - Output | 10V |
| Topology | Shift Register |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 60mA |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5948ADBQR Overview
To save board space, it uses the 24-SSOP (0.154, 3.90mm Width) package. The LED driver's design uses 16 outputs.As a mounting method, Surface Mount is used.With high efficiency and reliable performance, it emerges as a Linear.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.As a result, Signage is likely to benefit greatly.The frequency of 33MHz determines how it operates.In this case, it uses 24 terminations.The base is configured with 24 pins.If the voltage supply is lower than 3V, undetermined failures may occur.Based on our estimates, there are 16 segments.The mount is in the direction of Surface Mount.It is under the base part number TLC5948 that the LED driver can be found.There is no problem with the voltage of 5.5V.The voltage at the output terminal is 10V.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 3V.When the supply current should be less than 3mA, the device will provide high efficiency.There is no current that can be supplied to the load.
TLC5948ADBQR Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 33MHz
Supply voltage of 3.3V
TLC5948ADBQR Applications
There are a lot of Texas Instruments TLC5948ADBQR LED Driver ICs applications.
- High-end retail lighting
- Dimmable LED for vehicle interiors
- Medical surgery lighting
- Stage and Studio lighting
- LED headlights
- LED backlight driver for LCD displays for Tablets and Note PCs
- Panel lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- General lighting
- Industrial LED Lighting: Image Recognition Devices
