TLC5948APWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 33MHz |
| Base Part Number | TLC5948 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 18mA |
| Output Current | 60mA |
| Max Supply Current | 3mA |
| Voltage - Output | 10V |
| Topology | Shift Register |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5948APWP Overview
Its 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used to save board space. LED drivers designed using this technology use 16 outputs.To mount, use Surface Mount.When it emerges as a Linear, it shows high-performance and reliability.At -40°C~85°C TA, the led driver is capable of operating.Signage benefits significantly from the program.33MHz is the frequency in which it operates.It operates with terminations of 24.There are 24 pins on its base.If the voltage supply is less than 3V, undetermined failures will occur.We estimate that there are 16 segments.It is mounted in the way of Surface Mount.It is under the base part number TLC5948 that you can find this LED driver.5.5V is a maximum acceptable voltage for the supply.A 10V volt output voltage is provided by this device.Further, it can be classified as Display Drivers based on its characteristics.The maximum efficiency can be achieved by operating it at a minimal voltage of 3V.With a minimum supply current less than 3mA, this device achieves high efficiency.There is no current available to supply to the load.
TLC5948APWP Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 33MHz
Supply voltage of 3.3V
TLC5948APWP Applications
There are a lot of Texas Instruments TLC5948APWP LED Driver ICs applications.
- Replacement lamps
- Flicker-free LED Lighting using R1580N
- Linear fluorescent
- LED Lightings for Industrial Equipment
- Gallery lighting
- OLED power supply for portable equipment
- White LED Backlight for portable equipment
- Medical surgery lighting
- Portable lighting
- Other Electronic Devices
