TLC5948DBQ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 33MHz |
| Base Part Number | TLC5948 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 18mA |
| Max Supply Current | 40μA |
| Voltage - Output | 10V |
| Topology | Shift Register |
| Current - Output / Channel | 60mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5948DBQ Overview
On the board, there is also a 24-SSOP (0.154, 3.90mm Width) package that saves space.LED drivers use 16 outputs for their design.It is mounted using Surface Mount.This emerges as a Linear with high efficiency and reliability.The LED driver is capable of operating at a temperature of -40°C~85°C TA.There are considerable benefits for Signage.Using the frequency of 33MHz, it operates.The system operates with a termination of 0.There are 24 pins on the base of this LED driver.If the voltage supply is lower than 3V, undetermined failures may occur.There are estimated to be 16 segments.It's mounted in Surface Mount.This LED driver can be found under the base part number TLC5948.A maximum supply voltage of 5.5V is acceptable.The output voltage is 10V.The device has a pin count of 24.The system works with a minimum supply voltage of 3V in order to achieve maximum efficiency.This device is able to provide high efficiency when the maximal supply current should be less than 40μA.
TLC5948DBQ Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 33MHz
Supply voltage of 3.3V
TLC5948DBQ Applications
There are a lot of Texas Instruments TLC5948DBQ LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- General lighting
- Flicker-free LED Lighting using R1580N
- Street lighting
- Stage and Studio lighting
- Down lighting
- LED backlight driver for LCD displays for portable equipment
- Scanners and Handy Terminals
- LED headlights
- LED backlight driver for LCD displays for Tablets and Note PCs
