TLC5948DBQR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Digi-Reel® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 33MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLC5948 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 18mA |
| Max Supply Current | 40μA |
| Voltage - Output | 10V |
| Topology | Shift Register |
| Current - Output / Channel | 60mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5948DBQR Overview
In order to save board space, the 24-SSOP (0.154, 3.90mm Width) package is used. LED drivers with this design have 16 outputs.Surface Mount represents this mounting method.Linear emerges with high efficiency and reliability.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.Signage has many advantages.The system operates on the basis of the frequency 33MHz.In this case, there are 24 terminations.With a base of 24, this LED light driver is configured.Undetermined failures may occur when the voltage supply is less than 3V.A total of 16 segments are estimated.As you can see, it is mounted by Surface Mount.You can find this LED driver under the base part number TLC5948.A maximum supply voltage of 5.5V is acceptable.A voltage of 10V is produced by it.On it, there are 24 pins.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 3V.When the supply current should be less than 40μA, the device will provide high efficiency.
TLC5948DBQR Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 33MHz
Supply voltage of 3.3V
TLC5948DBQR Applications
There are a lot of Texas Instruments TLC5948DBQR LED Driver ICs applications.
- Portable lighting
- Dimmable LED for vehicle interiors
- A- lamps
- Constant Voltage Power Source for portable equipment
- Gallery lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Museum lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Scanners and Handy Terminals
- Down lights
