TLC5948PWP
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 33MHz |
| Base Part Number | TLC5948 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 18mA |
| Max Supply Current | 40μA |
| Voltage - Output | 10V |
| Topology | Shift Register |
| Current - Output / Channel | 60mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
TLC5948PWP Overview
Its 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used to save board space. LED drivers with this design have 16 outputs.The led light driver is mounted using Surface Mount.With high efficiency, it appears as a Linear.At -40°C~85°C TA, the led driver is capable of operating.The benefits it provides to Signage are considerable.It operates at 33MHz frequency.In order for it to operate, it has 24 terminations.It has a base configuration of 24 pins.A voltage supply below 3V may cause undetermined failures.There are estimated to be 16 segments.The device has been mounted on the Surface Mount.The LED driver is available under the part number TLC5948.The voltage of 5.5V is acceptable.A voltage of 10V is produced by it.This device contains 24 pins.It achieves maximum efficiency with a minimal voltage supply of 3V.The device can deliver high efficiency when the maximal supply current is less than 40μA.
TLC5948PWP Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 33MHz
Supply voltage of 3.3V
TLC5948PWP Applications
There are a lot of Texas Instruments TLC5948PWP LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Gallery lighting
- Stage and Studio lighting
- LED headlights
- Down lighting
- LED Lightings for Inspection Devices
- Dimmable LED for vehicle interiors
- Down lights
- Museum lighting
- Scanners and Handy Terminals
