TLC5948PWPR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Digi-Reel® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 33MHz |
| Base Part Number | TLC5948 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 18mA |
| Max Supply Current | 40μA |
| Voltage - Output | 10V |
| Topology | Shift Register |
| Current - Output / Channel | 60mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5948PWPR Overview
Space is saved using its 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. 16 outputs are designed into LED drivers.The led driver mounting is done by using Surface Mount.It emergys as a Linear with high efficiency and reliable performance.At -40°C~85°C TA, the led driver is capable of operating.A number of benefits are available to Signage.The system operates on the basis of the frequency 33MHz.In this case, it operates with terminations of 0.In this LED driver, the base is configured as 24.Undetermined failures may occur if the voltage supply falls below 3V.16 segments are present.This is mounted by Surface Mount.Under the base part number TLC5948, you'll find this LED driver.In this case, 5.5V is acceptable.The voltage output by it is 10V.24 pins are on the device.It achieves maximum efficiency with a minimal voltage supply of 3V.The device can deliver high efficiency when the maximal supply current is less than 40μA.
TLC5948PWPR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 33MHz
Supply voltage of 3.3V
TLC5948PWPR Applications
There are a lot of Texas Instruments TLC5948PWPR LED Driver ICs applications.
- Medical surgery lighting
- Down lights
- Constant Voltage Power Source for portable equipment
- Street lighting
- General lighting
- Auxiliary lights for on-vehicle cameras
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Linear fluorescent
- Refrigeration lighting
