TLC5951DAP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 38-PowerTSSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 38 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.101W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC5951 |
| Pin Count | 38 |
| Number of Outputs | 24 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 55mA |
| Power Dissipation | 3.101W |
| Output Current | 40mA |
| Max Supply Current | 3mA |
| Voltage - Output | 15V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 33 MHz |
| Number of Segments | 24 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5951DAP Overview
The 38-PowerTSSOP (0.240, 6.10mm Width) package is used for saving board space. It has 24 outputs for LED drivers.As far as mounting is concerned, Surface Mount is adopted.When it emerges as a Linear, it performs extremely well and is highly reliable.-40°C~85°C TA is the operating temperature and it works fine.There are many benefits for Signage.It operates with 38 terminations.The base is configured with 38 pins.The number of segments is 24.LED drivers are found under the base part number TLC5951.There is no problem with the voltage of 5.5V.The device has a voltage output of 15V volts.A device with 38 pins is available.In addition, its characteristics are classified into Display Drivers.Initially, it accepts a voltage of 3V.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.In the event that the maximum supply current is allowed, it reaches 5.5V.When the supply current should be less than 3mA, the device will provide high efficiency.40mA is the maximum amount of current that can be supplied to the load.This electronic component can fully perform its functions when the switching frequency is kept at 30MHz.
TLC5951DAP Features
Available in the 38-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
TLC5951DAP Applications
There are a lot of Texas Instruments TLC5951DAP LED Driver ICs applications.
- White LED Backlight for portable equipment
- LED Lighting PFCs, Linear Dimmable
- Linear fluorescent
- LED backlight driver for LCD displays for Tablets and Note PCs
- Down lights
- OLED power supply for portable equipment
- Architectural lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED headlights
- Dimmable LED for vehicle interiors
