TLC5952DAP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 5.318W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC5952 |
| Pin Count | 32 |
| Number of Outputs | 24 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 50mA |
| Power Dissipation | 2.765W |
| Output Current | 35mA |
| Max Supply Current | 50mA |
| Voltage - Output | 15V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 26.2mA 35mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 8 |
| Switching Frequency | 35MHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 11mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5952DAP Overview
The 32-PowerTSSOP (0.240, 6.10mm Width) package is used for saving board space. For the design of this LED driver, 24 outputs are used.It is mounted using Surface Mount.Initially, it emerges as a Linear with high efficiency and a high degree of reliability.At -40°C~85°C TA, the led driver is capable of operating.Signage has considerable advantages.For its operation, 32 terminations are designed.With a base of 32, this LED light driver is configured.The number of segments is 8.LED drivers can be found under the base part number TLC5952.The voltage of 5.5V is acceptable.There is 15V voltage output from the device.A total of 32 pins are present on this device.In addition, its characteristics are classified into Display Drivers.A minimal input voltage of 3V is required for it to operate.It works with the minimal supply voltage of 3V to meet highest efficiency standards.In the event that the maximum supply current is allowed, it reaches 5.5V.As long as the maximum supply current is less than 50mA, this device is capable of providing high efficiency.There is no current available to supply to the load.It's possible for this electronic component to fully function when the switching frequency is maintained at 35MHz.
TLC5952DAP Features
Available in the 32-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Switching frequency of 35MHz
TLC5952DAP Applications
There are a lot of Texas Instruments TLC5952DAP LED Driver ICs applications.
- Industrial LED Lighting: Image Recognition Devices
- LED Lighting PFCs, Linear Dimmable
- Architectural lighting
- Sports Facility Lighting
- Panel lighting
- Portable lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Gallery lighting
- Stage Lighting and Signage
- Flicker-free LED Lighting using R1580N
