TLC5952DAPR
| Parameters | |
|---|---|
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 5.318W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 35MHz |
| Base Part Number | TLC5952 |
| Pin Count | 32 |
| Number of Outputs | 24 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 50mA |
| Power Dissipation | 5.318W |
| Voltage - Output | 15V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 26.2mA 35mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 35 MHz |
| Number of Segments | 8 |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 11mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
TLC5952DAPR Overview
The 32-PowerTSSOP (0.240, 6.10mm Width) package is used for saving board space. There are 24 outputs used for the design of this LED drivers.The led driver mounting is done by using Surface Mount.It is highly reliable and high-performing when it emerges as a Linear.The LED driver is capable of operating at a temperature of -40°C~85°C TA.Signage has significant advantages.The system operates on the basis of the frequency 35MHz.The operation of this system is supported by 32 terminations.The LED light driver is configured with a base of 0 pins.In total, it includes 8 segments.It is under the base part number TLC5952 that the LED driver can be found.It is acceptable for the voltage to be 5.5V.There is 15V voltage output from the device.On it, there are 32 pins.Further, its characteristics allow it to be classified as Display Drivers.At a voltage of 3V, it operates at a minimal input voltage.For highest efficiency, it works with a minimal supply voltage of 3V.5.5V is the maximum value of supply current that can be used.
TLC5952DAPR Features
Available in the 32-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 35MHz
Supply voltage of 3.3V
TLC5952DAPR Applications
There are a lot of Texas Instruments TLC5952DAPR LED Driver ICs applications.
- Medical surgery lighting
- Replacement lamps
- Auxiliary lights for on-vehicle cameras
- General lighting
- Other Electronic Devices
- Scanners and Handy Terminals
- Down lighting
- Street lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED backlight driver for LCD displays for Tablets and Note PCs
