TLC5970RHPT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Max Power Dissipation | 4.149W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Base Part Number | TLC5970 |
| Pin Count | 28 |
| Number of Outputs | 3 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 10V |
| Nominal Supply Current | 35mA |
| Power Dissipation | 4.149W |
| Output Current | 150mA |
| Voltage - Output | 17V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 10V |
| Max Input Voltage | 36V |
| Internal Switch(s) | Yes |
| High Level Output Current | -30mA |
| Low Level Output Current | 30mA |
| fmax-Min | 20 MHz |
| Supply Voltage1-Nom | 24V |
| Number of Segments | 3 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TLC5970RHPT Overview
On the board, there is also a 28-VQFN Exposed Pad package that saves space.For the design of this LED driver, 3 outputs are used.The mounting method is Surface Mount.In this case, it emerges as a DC DC Regulator with a high efficiency.The led light driver operates normally at -40°C~85°C TA. The frequency of 20MHz is used as the basis for its operation.For its operation, terminations with a value of 0 are used.This module has 28 pins as its base.Based on our estimates, there are 3 segments.The LED driver is available under the part number TLC5970.As a maximum value, 36V is acceptable.It has a voltage output of 17V.28 pins are available on the device.Additionally, it can be classified as Display Drivers based on its characteristics.When the input voltage is set to 10V, it operates.The maximum efficiency standards can be met by operating at the minimal voltage of 10V during operation.In the case of supply current, there is a maximum value of 36V.You can supply 150mA current to the load.
TLC5970RHPT Features
Available in the 28-VQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 20MHz
TLC5970RHPT Applications
There are a lot of Texas Instruments TLC5970RHPT LED Driver ICs applications.
- Medical surgery lighting
- LED Lightings for Inspection Devices
- Flicker-free LED Lighting using R1580N
- Architectural lighting
- Stage Lighting and Signage
- Other Electronic Devices
- White LED Backlight for portable equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED Lighting PFCs, Linear Dimmable
- Constant Voltage Power Source for portable equipment
