TLC59711PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 10MHz |
| Base Part Number | TLC59711 |
| Number of Outputs | 12 |
| Max Output Current | 75mA |
| Operating Supply Voltage | 3.5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 32mA |
| Topology | Shift Register |
| Min Input Voltage | 4V |
| Max Input Voltage | 17V |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 60mA |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| fmax-Min | 10 MHz |
| Number of Segments | 12 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC59711PWPR Overview
Its 20-PowerTSSOP (0.173, 4.40mm Width) package is used to save board space. This LED driver has 12 outputs.The mounting method adopted is Surface Mount.There is no doubt that this is a very efficient and reliable Linear.If the led driver ic is set to -40°C~85°C TA, it will work normally.A frequency of 10MHz is used as the basis for operation.There are 20 terminations associated with it.This configuration is built upon 20 pins.The number of segments is estimated to be 12.Under the base part number TLC59711, you'll find this LED driver.It's acceptable for the voltage to be 5.5V.In addition, it can be classified as Display Drivers according to its characteristics.This device requires a minimum voltage of 4V volts.It is designed to operate at a minimal voltage of 3V to achieve the highest efficiency.It reaches 17V when the maximum supply current is allowed.There is 3.5V internal voltage required to power systems.When operating with a 75mA output current, the LED driver delivers all the benefits.
TLC59711PWPR Features
Available in the 20-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 10MHz
Supply voltage of 12V
Operating with the supply voltage of 3.5V
TLC59711PWPR Applications
There are a lot of Texas Instruments TLC59711PWPR LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- LED Lightings for Inspection Devices
- Industrial LED Lighting: Image Recognition Devices
- LED headlights
- LED Lightings for Industrial Equipment
- Refrigeration lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Gallery lighting
- OLED power supply for portable equipment
- Stage and Studio lighting
