TLC5971PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.121W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 12MHz |
| Base Part Number | TLC5971 |
| Pin Count | 20 |
| Number of Outputs | 12 |
| Max Supply Voltage | 17V |
| Min Supply Voltage | 6V |
| Nominal Supply Current | 36mA |
| Power Dissipation | 3.121W |
| Max Supply Current | 4mA |
| Topology | Shift Register |
| Min Input Voltage | 6V |
| Max Input Voltage | 17V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 60mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| Number of Segments | 12 |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5971PWP Overview
In order to save board space, the 20-PowerTSSOP (0.173, 4.40mm Width) package is used. A LED driver with 12 outputs is designed.Surface Mount is used to mount the led driver.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.In the 12MHz frequency range, it operates.In this case, it operates with terminations of 0.With 20 pins at the base, this LED driver has a base configuration.It is possible that failures will occur if the voltage supply is below 3V.A total of 12 segments have been created.Under the base part number TLC5971, you'll find this LED driver.A maximum supply voltage of 17V is acceptable.20 pins are available on the device.There is a maximum value of 5.5V supply voltage supported by this device. In addition, its characteristics are classified into Display Drivers.It operates with the minimal input voltage of 6V.A minimum supply voltage of 6V is required to meet the highest efficiency standards.In terms of supply current, 17V is the maximum value.It is possible to provide high efficiency when the maximal supply current is less than 4mA.
TLC5971PWP Features
Available in the 20-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 12MHz
Supply voltage of 12V
TLC5971PWP Applications
There are a lot of Texas Instruments TLC5971PWP LED Driver ICs applications.
- Amusement Machines
- Street lighting
- Flicker-free LED Lighting using R1580N
- High-end retail lighting
- LED Lightings for Industrial Equipment
- Architectural lighting
- Auxiliary lights for on-vehicle cameras
- Medical surgery lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Sports Facility Lighting
