TLC59731DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | EasySet™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Linear |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 6MHz |
| Base Part Number | TLC59731 |
| Number of Outputs | 3 |
| Max Output Current | 50mA |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 4.5A |
| Max Output Voltage | 21V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 6V |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 50mA |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -2A |
| Low Level Output Current | 2A |
| Number of Segments | 6 |
| Switching Frequency | 6MHz |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC59731DR Overview
8-SOIC (0.154, 3.90mm Width) package saves space on the board. As part of the design of this LED driver, there are 3 outputs that have been used.The mounting method adopted is Surface Mount.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.It is possible for the led driver ic to operate normally at -40°C~85°C TA.The system operates at a frequency of 6MHz.8 terminations are used in its operation.It has a base of 8 pins.Based on our estimates, there are 6 segments.As you can see, it is mounted by Surface Mount.It's under the TLC59731 base part number.It is acceptable to supply voltages of 6V.As a result of its characteristics, it is also classified as Display Drivers.This device operates with a minimum input voltage of 3V volts.For maximum efficiency, it operates at the minimal voltage of 3V.The allowable maximum value of supply current reaches 6V.Powering systems requires an internal voltage of 5V.Electronic components can function properly when their switching frequency is set to 6MHz.When operating with a 50mA output current, the LED driver delivers all the benefits.An LED driver belonging to the EasySet? series is an essential component in a wide range of applications.Voltages above 21V should not be allowed.
TLC59731DR Features
Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 6MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
Switching frequency of 6MHz
TLC59731DR Applications
There are a lot of Texas Instruments TLC59731DR LED Driver ICs applications.
- Amusement Machines
- Constant Voltage Power Source for portable equipment
- Other Electronic Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage and Studio lighting
- Auxiliary lights for on-vehicle cameras
- Stage Lighting and Signage
- Flicker-free LED Lighting using R1580N
- LED headlights
- Architectural lighting
