TLC5973D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | EasySet™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 12MHz |
| Base Part Number | TLC5973 |
| Number of Outputs | 3 |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 10mA |
| Output Current | 50mA |
| Max Supply Current | 10mA |
| Voltage - Output | 21V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 6V |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 50mA |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 50mA |
| Number of Segments | 3 |
| Switching Frequency | 3MHz |
| Multiplexed Display Capability | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5973D Overview
It saves board space with the 8-SOIC (0.154, 3.90mm Width) package. In this LED driver, there are 3 outputs.Surface Mount is used to mount the led light driver.In this case, the Linear emerges as highly efficient and reliable.The led light driver operates normally at -40°C~85°C TA. In this case, the frequency is 12MHz.In this case, the terminations are set to 8.There are 8 pins on the base of this LED driver.There are 3 segments in it.Surface Mount is mounted on it.LED drivers can be found under the base part number TLC5973.The voltage of 6V can be supplied.21V is the voltage output.As a result, it can also be classified as Display Drivers.It operates with the minimal input voltage of 3V.It achieves maximum efficiency with a minimal voltage supply of 3V.6V is the maximum value of supply current that can be used.When the maximum supply current is below 10mA, it is capable of delivering high efficiency.Loads can only be powered by 50mA current.Powering systems requires an internal voltage of 5V.This electronic component can fully perform when the switching frequency is 3MHz.LED drivers in the EasySet? series are essential for a wide range of applications.
TLC5973D Features
Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 12MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
Switching frequency of 3MHz
TLC5973D Applications
There are a lot of Texas Instruments TLC5973D LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Medical surgery lighting
- Replacement lamps
- Amusement Machines
- Architectural lighting
- LED headlights
- Refrigeration lighting
- Dimmable LED for vehicle interiors
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Museum lighting
