TLC6C5712QPWPRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC6C5712 |
| Pin Count | 28 |
| Number of Outputs | 12 |
| Max Output Current | 14mA |
| Max Supply Voltage | 5.5V |
| Quiescent Current | 3.5mA |
| Supply Current-Max | 4.5mA |
| Max Output Voltage | 7V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 75mA |
| Min Output Voltage | 500mV |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| fmax-Min | 10 MHz |
| Dimming | PWM |
| Number of Segments | 12 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | YES |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC6C5712QPWPRQ1 Overview
28-PowerTSSOP (0.173, 4.40mm Width) package saves space on the board. For the design of this LED driver, 12 outputs are used.Surface Mount is used for mounting the led light driver.In this case, the result is a Linear with high efficiency.If the led driver ic is set to -40°C~125°C TA, it will work normally.Backlight benefits significantly from the program.It operates with 28 terminations.With 28 pins at the base, this LED driver has a base configuration.A total of 12 segments have been created.There is a device mounted on the Surface Mount.The LED driver can be found under the base part number TLC6C5712.A maximum supply voltage of 5.5V is acceptable.The device has 28 pins.Initially, it accepts a voltage of 3V.5.5V is the maximum value of supply current that can be used.As long as the switching frequency is maintained at 1MHz, this electronic component is able to perform all of its functions properly.A LED driver that operates at 14mA output current provides all the benefits of a LED driver.LED drivers belonging to the Automotive, AEC-Q100 series are used in a wide variety of applications.No external factors cause 3.5mA current to be consumed.7V should be the maximum output voltage.The minimal voltage it outputs maintains at 500mV.
TLC6C5712QPWPRQ1 Features
Available in the 28-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.3V
Switching frequency of 1MHz
TLC6C5712QPWPRQ1 Applications
There are a lot of Texas Instruments TLC6C5712QPWPRQ1 LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Stage Lighting and Signage
- Auxiliary lights for on-vehicle cameras
- Constant Voltage Power Source for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Stage and Studio lighting
- Replacement lamps
- Down lighting
- LED Lightings for Industrial Equipment
- Sports Facility Lighting
