TLC6C5912QDWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 800.987426mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLC6C5912 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 170μA |
| Max Supply Current | 170μA |
| Voltage - Output | 40V |
| Topology | Shift Register |
| Output Characteristics | OPEN-DRAIN |
| Output Current per Channel | 50mA |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 50mA |
| Internal Switch(s) | Yes |
| Number of LEDs | 12 |
| fmax-Min | 10 MHz |
| Number of Segments | 12 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC6C5912QDWRQ1 Overview
The 20-SOIC (0.295, 7.50mm Width) package conserves board space. It adopts the way of Surface Mount for mounting.It is highly reliable and high-performing when it emerges as a Linear.The led light driver is capable of working normally at -40°C~150°C TJ.The system operates with a termination of 0.With a base of 20, this LED light driver is configured.If the voltage supply is less than 3V, undetermined failures will occur.The segment count is 12.There is a device mounted on the Surface Mount.TLC6C5912 is the base part number for the LED driver.5.5V is a maximum acceptable voltage for the supply.A 40V volt output voltage is provided by this device.It is also classified into Display Drivers according to its characteristics.With a minimal supply voltage of 3V, it reaches the highest efficiency levels.With a minimum supply current less than 170μA, this device achieves high efficiency.There are many applications for this LED driver belonging to the Automotive, AEC-Q100 series.
TLC6C5912QDWRQ1 Features
Available in the 20-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~150°C TJ
Supply voltage of 5V
TLC6C5912QDWRQ1 Applications
There are a lot of Texas Instruments TLC6C5912QDWRQ1 LED Driver ICs applications.
- Amusement Machines
- Museum lighting
- LED Lighting PFCs, Linear Dimmable
- Scanners and Handy Terminals
- Down lights
- Medical surgery lighting
- Flicker-free LED Lighting using R1580N
- Stage Lighting and Signage
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Linear fluorescent
