TLC7701IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLC7701 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 725mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 1.1V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 1.04V |
| Max Reset Threshold Voltage | 1.16V |
| Threshold Voltage | +1.1V |
| Overvoltage Threshold | 1.16V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC7701IDR Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During the reflow process, a peak temperature of 260 is specified for the package. During operation, the power ic is supplied with a voltage of 2.7V. Power management conducts at a voltage of 1. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 8. There are 8 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supply current of the power management is 9μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. To find similar IC managements from the manufacturer, you can always search by TLC7701. A maximum supply temperature of 16μA can be used.
TLC7701IDR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7701IDR Applications
There are a lot of Texas Instruments TLC7701IDR Voltage Supervisors applications.
- DC stabilized power supply module
- Insulation fault location system
- Data storage applications
- Urban rail transit weak current power monitoring
- Electric heating appliances
- Low voltage/high power - AI, GPU
- Multi-voltage system
- Consumer electronics
- Leakage protection
- Unattended substation automation
