TLC7701IPWR
| Parameters | |
|---|---|
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 525mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC7701 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 525mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 1.1V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 1.04V |
| Max Reset Threshold Voltage | 1.16V |
| Threshold Voltage | +1.1V |
| Overvoltage Threshold | 1.16V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
TLC7701IPWR Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a 8-TSSOP (0.173, 4.40mm Width) package. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. There is a voltage supply of 2.7V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 8 pins. Power managment ic pin count is 8. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. There should be no more than 6V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supply current of the power management is 9μA. Additionally, IC management are a variety of features, for example [0], to name a few. For similar manage ics search of the manufacturer, you can always refer to TLC7701, the base PMIC number. The maximum supply temperature is 16μA.
TLC7701IPWR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7701IPWR Applications
There are a lot of Texas Instruments TLC7701IPWR Voltage Supervisors applications.
- Power distribution systems of ICU
- Kitchen appliances
- Detection of phase imbalance
- Telecommunications equipment
- Detection of phase sequence
- WiFi router
- Satellite navigation
- Network equipment
- Medical-specific isolation transformer
- Medical-specific insulation monitor
