banner_page

TLC7701IPWRG4

2.7V8 Terminals 8-Pin TLC7701 Voltage supervisor1 Channels Min 2V Max 6V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC7701IPWRG4
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 267
  • Description: 2.7V8 Terminals 8-Pin TLC7701 Voltage supervisor1 Channels Min 2V Max 6V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature POWER-ON RESET GENERATOR
Subcategory Power Management Circuits
Max Power Dissipation 525mW
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.7V
Terminal Pitch 0.65mm
Base Part Number TLC7701
Output Push-Pull, Totem Pole
Pin Count 8
Number of Channels 1
Max Supply Voltage 6V
Min Supply Voltage 2V
Operating Supply Current 9μA
Power Dissipation 525mW
Max Supply Current 16μA
Adjustable Threshold NO
Quiescent Current 9μA
Watchdog Timer No
Reset Active High/Active Low
Voltage - Threshold 1.1V
Number of Voltages Monitored 1
Reset Timeout 1.1ms Minimum
Min Reset Threshold Voltage 1.04V
Max Reset Threshold Voltage 1.16V
Threshold Voltage +1.1V
Overvoltage Threshold 1.16V
Height 1.2mm
Length 3mm
Width 4.4mm
Thickness 1mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC7701IPWRG4 Overview


This power management consists of 8 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes 8-TSSOP (0.173, 4.40mm Width) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 2.7V. Power ics operate at 1 supply voltages. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Power management has a total of 8 pins. 8 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 9μA volt supply current. Among other features, IC power can be also taken advantage of [0], for instance. To find similar IC managements from the manufacturer, you can always search by TLC7701. A maximum supply temperature of 16μA can be used with this power management.

TLC7701IPWRG4 Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current

TLC7701IPWRG4 Applications


There are a lot of Texas Instruments TLC7701IPWRG4 Voltage Supervisors applications.

  • Automotive permanent magnet synchronous motors
  • Microcontroller system
  • Radio
  • Power distribution systems of CCU
  • Satellite navigation
  • Rechargeable batteries
  • Set top box
  • Digitally controlled LDO regulators circuit
  • Household appliances
  • FPGA design

Write a review

Note: HTML is not translated!
    Bad           Good