TLC7701MDREP
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLC7701 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 16μA |
| Power Dissipation | 525mW |
| Max Supply Current | 18μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 1.1V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 1.04V |
| Max Reset Threshold Voltage | 1.16V |
| Threshold Voltage | +1.1V |
| Undervoltage Threshold | 1.04V |
| Overvoltage Threshold | 1.16V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 525mW |
TLC7701MDREP Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 2.7V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 8. This power management has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. A Surface Mount mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -55°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a supply current of 16μA for the power management. Supervisors are also additional features, such as [0] for example, which are worth mentioning. To find similar IC managements from the manufacturer, you can always search by TLC7701. The maximum supply temperature voltage supervisor can handle is 18μA.
TLC7701MDREP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
16μA operating supply current
TLC7701MDREP Applications
There are a lot of Texas Instruments TLC7701MDREP Voltage Supervisors applications.
- Unattended substation automation
- FPGA design
- Military electronics
- Personal computers
- Efficient information transmission
- Detection of phase loss
- Battery-powered equipment
- Data storage applications
- External alarm
- Microprocessor system
