TLC7701MPWREP
| Parameters | |
|---|---|
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 525mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC7701 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 16μA |
| Power Dissipation | 525mW |
| Max Supply Current | 18μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 1.1V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 1.04V |
| Max Reset Threshold Voltage | 1.16V |
| Threshold Voltage | +1.1V |
| Undervoltage Threshold | 1.04V |
| Overvoltage Threshold | 1.16V |
| Height | 1.2mm |
TLC7701MPWREP Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find 8-TSSOP (0.173, 4.40mm Width) functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 2.7V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. This power ic can be sub-categorized as Power Management Circuits. A total of 8 pins are located on this power management. This power management has 8 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -55°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a 16μA supply current present in the power management. Among other features, IC power can be also taken advantage of [0], for instance. For similar manage ics search of the manufacturer, you can always refer to TLC7701, the base PMIC number. The maximum supply temperature is 18μA.
TLC7701MPWREP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
16μA operating supply current
TLC7701MPWREP Applications
There are a lot of Texas Instruments TLC7701MPWREP Voltage Supervisors applications.
- Personal computers
- Solar power charger
- Electrical fire monitoring system
- Power distribution systems of ICU
- Satellite navigation
- Detection of phase imbalance
- Kitchen appliances
- Power distribution systems of operating room
- Medical-specific isolation transformer
- Precision measurement
