TLC7701QD
| Parameters | |
|---|---|
| Overvoltage Threshold | 1.16V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLC7701 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 725mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 1.1V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 1.04V |
| Max Reset Threshold Voltage | 1.16V |
| Threshold Voltage | +1.1V |
TLC7701QD Overview
It is mounted through 8 terminals on the power management. Power management is packaged in a Tube way. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 2.7V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 8 pins that are attached to IC management. 8 pins are on the supervisor. It is recommended that Vsup should not be less than 2V for this IC power. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supply current of the power management is 9μA. The other features include, for example, [0], which is just one example. If you want to search for similar IC managements of this manufacturer, you can always refer to TLC7701, which is the base power ics number. Voltage supervisor can work with a supply temperature of 16μA at the most.
TLC7701QD Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7701QD Applications
There are a lot of Texas Instruments TLC7701QD Voltage Supervisors applications.
- Transformer load monitoring equipment
- DVR
- Medical-specific isolation transformer
- Network equipment
- Battery cars
- emergency room
- Low voltage/high power - AI, GPU
- Radio
- External alarm
- Radar
