Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
POWER-ON RESET GENERATOR |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
525mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.65mm |
Base Part Number |
TLC7701 |
Output |
Push-Pull, Totem Pole |
Pin Count |
8 |
Number of Channels |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
9μA |
Power Dissipation |
525mW |
Max Supply Current |
16μA |
Adjustable Threshold |
NO |
Quiescent Current |
9μA |
Watchdog Timer |
No |
Reset |
Active High/Active Low |
Voltage - Threshold |
1.1V |
Number of Voltages Monitored |
1 |
Reset Timeout |
1.1ms Minimum |
Min Reset Threshold Voltage |
1.04V |
Max Reset Threshold Voltage |
1.16V |
Threshold Voltage |
+1.1V |
Overvoltage Threshold |
1.16V |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC7701QPWG4 Overview
There are 8 terminals connected to this power management, which makes it easy to mount. A Tube package is used to package the power management. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find 8-TSSOP (0.173, 4.40mm Width) functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. In a 2.7V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. Power Management Circuits is a subcategory of this PMIC chip. A total of 8 pins are located on this power management. This power management system has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2V, which is the minimum supply voltage that should be applied. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 9μA is the recommended value. The other features include, for example, [0], which is just one example. A similar IC managements number of the manufacturer can always be found by using TLC7701, the base power ics number. The maximum supply temperature voltage supervisor can handle is 16μA.
TLC7701QPWG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7701QPWG4 Applications
There are a lot of Texas Instruments TLC7701QPWG4 Voltage Supervisors applications.
- Power distribution systems of CCU
- Urban rail transit weak current power monitoring
- Fire equipment power monitoring system
- Sensitive sensors
- Leakage current detection
- Insulation fault location system
- Detection of phase imbalance
- Computer applications
- Microprocessor system
- Radio