banner_page

TLC7701QPWRG4

2.7V8 Terminals 8-Pin TLC7701 Voltage supervisor1 Channels Min 2V Max 6V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC7701QPWRG4
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 929
  • Description: 2.7V8 Terminals 8-Pin TLC7701 Voltage supervisor1 Channels Min 2V Max 6V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature POWER-ON RESET GENERATOR
Subcategory Power Management Circuits
Max Power Dissipation 525mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.7V
Terminal Pitch 0.65mm
Base Part Number TLC7701
Output Push-Pull, Totem Pole
Pin Count 8
Number of Channels 1
Max Supply Voltage 6V
Min Supply Voltage 2V
Operating Supply Current 9μA
Power Dissipation 525mW
Max Supply Current 16μA
Adjustable Threshold NO
Quiescent Current 9μA
Watchdog Timer No
Reset Active High/Active Low
Voltage - Threshold 1.1V
Number of Voltages Monitored 1
Reset Timeout 1.1ms Minimum
Min Reset Threshold Voltage 1.04V
Max Reset Threshold Voltage 1.16V
Threshold Voltage +1.1V
Overvoltage Threshold 1.16V
Height 1.2mm
Length 3mm
Width 4.4mm
Thickness 1mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC7701QPWRG4 Overview


A total of 8 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. In this IC management you will find 8-TSSOP (0.173, 4.40mm Width) functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 2.7V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 8 pins. This power management has 8 pins. It is recommended that Vsup should not be less than 2V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during -40°C~125°C TA . During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. As far as the supply current of the power management is concerned, it is 9μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. If you want to search for similar IC managements of this manufacturer, you can always refer to TLC7701, which is the base power ics number. The power management can work with a maximum supply temperature of 16μA.

TLC7701QPWRG4 Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current

TLC7701QPWRG4 Applications


There are a lot of Texas Instruments TLC7701QPWRG4 Voltage Supervisors applications.

  • Leakage protection
  • Military electronics
  • Smart meter
  • Electronics installed in the vehicle
  • Radio
  • Digitally controlled LDO regulators circuit
  • Solar power charger
  • Kitchen appliances
  • Battery cars
  • Unattended substation automation

Write a review

Note: HTML is not translated!
    Bad           Good