TLC7701QPWRQ1
| Parameters | |
|---|---|
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 525mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC7701 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 525mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 1.1V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 1.04V |
| Max Reset Threshold Voltage | 1.16V |
| Threshold Voltage | +1.1V |
| Overvoltage Threshold | 1.16V |
| Height | 1.2mm |
| Length | 3mm |
TLC7701QPWRQ1 Overview
This power management consists of 8 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find 8-TSSOP (0.173, 4.40mm Width) functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 2.7V. During operation, the power ic is supplied with a voltage of 1. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 8 pins. There are 8 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 6V volts in this IC power. The mounting type of the supervisors is Surface MountYou should set the supervisor's temperature during -40°C~125°C TA . As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. Supplied with a operating current of 9μA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to TLC7701, the base PMIC number. The maximum supply temperature is 16μA. The IC power that you are looking at comes from our well-known Automotive, AEC-Q100 series product line.
TLC7701QPWRQ1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7701QPWRQ1 Applications
There are a lot of Texas Instruments TLC7701QPWRQ1 Voltage Supervisors applications.
- Fire equipment power monitoring system
- DVR
- Power distribution systems of infant care room
- Satellite navigation
- Leakage protection
- Smart meter
- DC stabilized power supply module
- Magnetic resonance imaging
- Radar
- Kitchen appliances
