TLC7703IDR
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLC7703 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 725mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 2.56V |
| Max Reset Threshold Voltage | 2.7V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.63V |
| Overvoltage Threshold | 2.7V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
TLC7703IDR Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 2.7V volt supply. Power ics operate at 1 supply voltages. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. 8 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. For this power management, there is an 9μA volt supply current. As well as this, there are other features to mention such as [0], for example. It is always advisable to use TLC7703, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 16μA can be used with this power management.
TLC7703IDR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7703IDR Applications
There are a lot of Texas Instruments TLC7703IDR Voltage Supervisors applications.
- Electronics installed in the vehicle
- Linux and server computing
- Urban rail transit weak current power monitoring
- Power distribution systems of infant care room
- Efficient information transmission
- Network equipment
- WiFi router
- Transformer load monitoring equipment
- Detection of phase sequence
- Satellite navigation
