TLC7703IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 525mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC7703 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 525mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 2.56V |
| Max Reset Threshold Voltage | 2.7V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.63V |
| Overvoltage Threshold | 2.7V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC7703IPWR Overview
This power management consists of 8 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes 8-TSSOP (0.173, 4.40mm Width) functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 2.7V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 8 pins on the board. This power management has 8 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. Supplied with a operating current of 9μA, this PMIC is capable of fully function as specified. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use TLC7703, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature voltage supervisor can handle is 16μA.
TLC7703IPWR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7703IPWR Applications
There are a lot of Texas Instruments TLC7703IPWR Voltage Supervisors applications.
- Smart meter
- Cloud computing
- WiFi router
- Efficient information transmission
- Detection of phase imbalance
- Analog circuit
- Urban rail transit weak current power monitoring
- Insulation fault location system
- Satellite navigation
- Consumer electronics
