TLC7703QPW
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 525mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC7703 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 525mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 2.56V |
| Max Reset Threshold Voltage | 2.7V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.63V |
| Overvoltage Threshold | 2.7V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
TLC7703QPW Overview
A total of 8 terminals are used to mount this power management. In terms of packaging, power management follows the Tube model. As a reference, this IC management includes 1 functions for your convenience. There are a total of 1 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes 8-TSSOP (0.173, 4.40mm Width) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. In a 2.7V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. There is a subcategory of this power ic known as Power Management Circuits. 8 pins are present in total in this power management. 8 pins make up the power management. A voltage (Vsup) that doesn't fall below 2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supply current of the power management is 9μA. Among other features, IC power can be also taken advantage of [0], for instance. You can always use TLC7703, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 16μA can be used with this power management.
TLC7703QPW Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7703QPW Applications
There are a lot of Texas Instruments TLC7703QPW Voltage Supervisors applications.
- DC stabilized power supply module
- Computer applications
- Digitally controlled LDO regulators circuit
- Display equipment
- Functional modules
- Important electronics for automotive protection
- Detection of phase sequence
- FPGA design
- Microprocessor system
- Personal computers
