TLC7705IDG4
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLC7705 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 725mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 4.47V |
| Max Reset Threshold Voltage | 4.63V |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.63V |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
TLC7705IDG4 Overview
It is mounted through 8 terminals on the power management. This power ic is packaged in a way that looks like a Tube. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 1 channels. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. In a 2.7V supply voltage, the power management conducts. Power ics operate at 1 supply voltages. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 8 pins that are attached to IC management. This power management system has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2V, which is the minimum supply voltage that should be applied. There should be no more than 6V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 9μA is the recommended value. Additionally, there are many other features that can be found inside of the power management, such as [0]. A similar IC managements number of the manufacturer can always be found by using TLC7705, the base power ics number. A maximum supply temperature of 16μA can be used.
TLC7705IDG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7705IDG4 Applications
There are a lot of Texas Instruments TLC7705IDG4 Voltage Supervisors applications.
- Medical-specific isolation transformer
- Power distribution systems of infant care room
- Set top box
- Rechargeable batteries
- Military electronics
- Leakage protection
- Digitally controlled LDO regulators circuit
- Insulation fault location system
- Microprocessor system
- Computer applications
