TLC7705IPWR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 525mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC7705 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 525mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 4.47V |
| Max Reset Threshold Voltage | 4.63V |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.63V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC7705IPWR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaging is in the form of a Cut Tape (CT). There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. Please find attached 8-TSSOP (0.173, 4.40mm Width) functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 2.7V. When 1 is applied to the power ic, it conducts. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 8 pins are located on this power management. The pins of the power management system count 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 9μA volt supply current. Power management is also possible to add other features such as POWER-ON RESET GENERATOR to name a few. For similar manage ics search of the manufacturer, you can always refer to TLC7705, the base PMIC number. At the most, voltage supervisor can work with a supply temperature of 16μA.
TLC7705IPWR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7705IPWR Applications
There are a lot of Texas Instruments TLC7705IPWR Voltage Supervisors applications.
- Detection of phase sequence
- Insulation fault location system
- Unattended substation automation
- Transformer load monitoring equipment
- Smartphones
- Military communications
- Important electronics for automotive protection
- Urban rail transit weak current power monitoring
- Sensitive sensors
- Military electronics
