TLC7705QDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLC7705 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 725mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 4.47V |
| Max Reset Threshold Voltage | 4.63V |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.63V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC7705QDR Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 2.7V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 8 pins on power management. There are 8 pins on the supervisor. It is recommended that Vsup should not be less than 2V for this IC power. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 9μA volt supply current. Additionally, there are many other features that can be found inside of the power management, such as [0]. If you want to search for similar IC managements of this manufacturer, you can always refer to TLC7705, which is the base power ics number. Voltage supervisor can work with a supply temperature of 16μA at the most.
TLC7705QDR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7705QDR Applications
There are a lot of Texas Instruments TLC7705QDR Voltage Supervisors applications.
- Stable power system
- emergency room
- Precision measurement
- Medical-specific isolation transformer
- Fire equipment power monitoring system
- Embedded computing
- Digitally controlled LDO regulators circuit
- Solar power charger
- Microprocessor system
- External alarm
