TLC7705QPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 525mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC7705 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 525mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 4.47V |
| Max Reset Threshold Voltage | 4.63V |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.63V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC7705QPW Overview
A total of 8 terminals are used to mount this power management. Power management is packaged in a Tube way. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of 8-TSSOP (0.173, 4.40mm Width) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 2.7V. During operation, the power ic is supplied with a voltage of 1. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 8 pins on power management. 8 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2V, which is the minimum supply voltage that should be applied. There should be no more than 6V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. For this power management, there is an 9μA volt supply current. Power management is also possible to add other features such as POWER-ON RESET GENERATOR to name a few. To find similar IC managements from the manufacturer, you can always search by TLC7705. A maximum supply temperature of 16μA can be used with this power management.
TLC7705QPW Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7705QPW Applications
There are a lot of Texas Instruments TLC7705QPW Voltage Supervisors applications.
- Satellite navigation
- DSP
- Medical-specific insulation monitor
- Urban rail transit weak current power monitoring
- Precision measurement
- Important electronics for automotive safety
- Military electronics
- Efficient information transmission
- Important electronics for automotive protection
- Microprocessor system
