TLC7705QPWREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 525mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC7705 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 525mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.55V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 4.43V |
| Max Reset Threshold Voltage | 4.63V |
| Threshold Voltage | +4.5V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.63V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC7705QPWREP Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find 8-TSSOP (0.173, 4.40mm Width) functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. In a 2.7V supply voltage, the power management conducts. When a supply voltage of 1 is applied to the power ic, it conducts. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 8 pins on IC management. The pins of the power management system count 8. IC management can only work with a supply voltage of 2V volts. The supply voltage (Vsup) should not exceed 6V volts in this IC power. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. There is a 9μA supply current present in the power management. Additionally, IC management are a variety of features, for example [0], to name a few. A similar IC managements number of the manufacturer can always be found by using TLC7705, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 16μA.
TLC7705QPWREP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7705QPWREP Applications
There are a lot of Texas Instruments TLC7705QPWREP Voltage Supervisors applications.
- Battery cars
- Detection of phase sequence
- Analog circuit
- DSP
- Telecommunications equipment
- Medical-specific insulation monitor
- Smartphones
- Display equipment
- Network equipment
- Power distribution systems of infant care room
