Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
POWER-ON RESET GENERATOR |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
725mW |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TLC7725 |
Output |
Push-Pull, Totem Pole |
Pin Count |
8 |
Number of Channels |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
9μA |
Power Dissipation |
725mW |
Max Supply Current |
16μA |
Adjustable Threshold |
NO |
Quiescent Current |
9μA |
Reset |
Active High/Active Low |
Number of Voltages Monitored |
1 |
Reset Timeout |
1.1ms Minimum |
Min Reset Threshold Voltage |
2.18V |
Max Reset Threshold Voltage |
2.32V |
Threshold Voltage |
+2.25V |
Undervoltage Threshold |
2.25V |
Overvoltage Threshold |
2.32V |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC7725IDRG4 Overview
There are 8 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. For your reference, this IC power includes a list of 1 functions. This power management is made up of 1 channels which are available in a series format. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. When a supply voltage of 5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. There is a subcategory of this power ic known as Power Management Circuits. 8 pins are present in total in this power management. Pin count of the power management is 8. A voltage (Vsup) that doesn't fall below 2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a supply current of 9μA for the power management. Power management is also possible to add other features such as POWER-ON RESET GENERATOR to name a few. It is always advisable to use TLC7725, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 16μA.
TLC7725IDRG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7725IDRG4 Applications
There are a lot of Texas Instruments TLC7725IDRG4 Voltage Supervisors applications.
- Data storage applications
- Important electronics for automotive protection
- Battery-powered equipment
- Military communications
- Telecommunications equipment
- Microcontroller system
- Digitally controlled LDO regulators circuit
- Leakage current detection
- Urban rail transit weak current power monitoring
- Detection of phase sequence