Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
POWER-ON RESET GENERATOR |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
525mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
TLC7725 |
Output |
Push-Pull, Totem Pole |
Pin Count |
8 |
Max Output Current |
2mA |
Number of Channels |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
9μA |
Nominal Supply Current |
9μA |
Power Dissipation |
525mW |
Max Supply Current |
16μA |
Adjustable Threshold |
NO |
Quiescent Current |
9μA |
Reset |
Active High/Active Low |
Number of Voltages Monitored |
1 |
Reset Timeout |
1.1ms Minimum |
Min Reset Threshold Voltage |
2.18V |
Max Reset Threshold Voltage |
2.32V |
Threshold Voltage |
+2.25V |
Undervoltage Threshold |
2.25V |
Overvoltage Threshold |
2.32V |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC7725IPW Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Tube-packaging is used. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find 8-TSSOP (0.173, 4.40mm Width) functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. In a 1 supply voltage, the PMIC chip conducts. Power Management Circuits is a subcategory of this PMIC chip. A total of 8 pins are located on this power management. The pins of the power management system count 8. It is recommended that Vsup should not be less than 2V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. Supplied with a operating current of 9μA, this PMIC is capable of fully function as specified. Additionally, IC management are a variety of features, for example [0], to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to TLC7725, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 16μA.
TLC7725IPW Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7725IPW Applications
There are a lot of Texas Instruments TLC7725IPW Voltage Supervisors applications.
- Magnetic resonance imaging
- Detection of phase imbalance
- Satellite navigation
- Fire equipment power monitoring system
- Household appliances
- Rechargeable batteries
- Detection of phase loss
- Efficient information transmission
- Sensitive sensors
- Analog circuit