TLC7725QD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC7725 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 725mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 2.18V |
| Max Reset Threshold Voltage | 2.32V |
| Threshold Voltage | +2.25V |
| Undervoltage Threshold | 2.25V |
| Overvoltage Threshold | 2.32V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC7725QD Overview
Power management is mounted through 8 terminals. A Tube package is used to package the power management. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts in a 5V-voltage supply. When 1 is applied to the power ic, it conducts. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 8 pins in it. 8 pins make up the power management. IC management can only work with a supply voltage of 2V volts. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. As far as the supply current of the power management is concerned, it is 9μA. There are also other features in the software such as [0], just to mention a few. A similar IC managements number of the manufacturer can always be found by using TLC7725, the base power ics number. The maximum supply temperature voltage supervisor can handle is 16μA.
TLC7725QD Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7725QD Applications
There are a lot of Texas Instruments TLC7725QD Voltage Supervisors applications.
- Rechargeable batteries
- Digitally controlled LDO regulators circuit
- Power distribution systems of infant care room
- Satellite navigation
- Solar power charger
- Leakage protection
- Radar
- Refrigeration
- Functional modules
- Smartphones
