TLC7725QPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 525mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC7725 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 525mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 2.18V |
| Max Reset Threshold Voltage | 2.32V |
| Threshold Voltage | +2.25V |
| Undervoltage Threshold | 2.25V |
| Overvoltage Threshold | 2.32V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC7725QPWR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. It is packaged with Cut Tape (CT). Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes 8-TSSOP (0.173, 4.40mm Width) functions for your convenience. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 5V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 8 pins. There are 8 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. There should be no more than 6V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 9μA is the recommended value. There are also other features in the software such as [0], just to mention a few. If you want to search for similar IC managements of this manufacturer, you can always refer to TLC7725, which is the base power ics number. A maximum supply temperature of 16μA can be used.
TLC7725QPWR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7725QPWR Applications
There are a lot of Texas Instruments TLC7725QPWR Voltage Supervisors applications.
- FPGA design
- Precision measurement
- Fire equipment power monitoring system
- Linux and server computing
- Battery cars
- Computer applications
- Detection of phase sequence
- Radio
- Electronics installed in the vehicle
- Dash board
