banner_page

TLC7733IDRG4

5V8 Terminals 8-Pin TLC7733 Voltage supervisor1 Channels Min 2V Max 6V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC7733IDRG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 469
  • Description: 5V8 Terminals 8-Pin TLC7733 Voltage supervisor1 Channels Min 2V Max 6V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature POWER-ON RESET GENERATOR
Subcategory Power Management Circuits
Max Power Dissipation 725mW
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number TLC7733
Output Push-Pull, Totem Pole
Pin Count 8
Number of Channels 1
Max Supply Voltage 6V
Min Supply Voltage 2V
Operating Supply Current 9μA
Power Dissipation 725mW
Max Supply Current 16μA
Adjustable Threshold NO
Quiescent Current 9μA
Reset Active High/Active Low
Number of Voltages Monitored 1
Reset Timeout 1.1ms Minimum
Min Reset Threshold Voltage 2.86V
Max Reset Threshold Voltage 3V
Threshold Voltage +2.93V
Undervoltage Threshold 2.93V
Overvoltage Threshold 3V
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC7733IDRG4 Overview


There are 8 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 5V. IC management is possible to find a succession of 1 voltages that have been checked. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. Pin count of the power management is 8. Supply voltage (Vsup) should be at least 2V for this power management. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 9μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. It is always advisable to use TLC7733, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 16μA.

TLC7733IDRG4 Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current

TLC7733IDRG4 Applications


There are a lot of Texas Instruments TLC7733IDRG4 Voltage Supervisors applications.

  • Embedded computing
  • Satellite navigation
  • Detection of phase sequence
  • Automotive permanent magnet synchronous motors
  • Efficient information transmission
  • Leakage protection
  • Urban rail transit weak current power monitoring
  • Medical-specific isolation transformer
  • Precision measurement
  • Unattended substation automation

Write a review

Note: HTML is not translated!
    Bad           Good