TLC7733QD
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC7733 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 725mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 2.86V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 3V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
TLC7733QD Overview
It is mounted through 8 terminals on the power management. Power management is packaged in a Tube way. In this IC power you will find 1 functions for you to refer to. There are 1 channels available on this supervisor, and each channel has a different function. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The power management belongs to the Power Management Circuits subcategory. In total, it has 8 pins on IC management. The pins of the power management system count 8. IC management can only work with a supply voltage of 2V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 9μA volt supply current. Power management is also possible to add other features such as POWER-ON RESET GENERATOR to name a few. For similar manage ics search of the manufacturer, you can always refer to TLC7733, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 16μA.
TLC7733QD Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7733QD Applications
There are a lot of Texas Instruments TLC7733QD Voltage Supervisors applications.
- FPGA design
- Leakage protection
- Telecommunications equipment
- Embedded computing
- Multi-voltage system
- Automotive permanent magnet synchronous motors
- Network equipment
- Digitally controlled LDO regulators circuit
- Smart meter
- Precision measurement
