TLC7733QPE4
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 8 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 1W |
| Operating Supply Current | 9μA |
| Power Dissipation | 1W |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1 ms |
| Min Reset Threshold Voltage | 2.86V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 3V |
| Length | 9.59mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLC7733QPE4 Overview
There are 8 terminals on this power management that allow it to be mounted. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached PDIP functions for your reference in this IC power. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. 8 pins are on the supervisor. Supply voltage (Vsup) should be at least 2V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. In order to maintain a stable supply current for the power management, 9μA is the recommended value. In addition, IC management are other features such as [0], to mention only a few. This supervisor includes other kinds of integrated circuits, such as POWER SUPPLY SUPPORT CIRCUIT as well as other kinds. A maximum supply temperature of 16μA can be used with this power management.
TLC7733QPE4 Features
Minimum supply voltage of 2V
9μA operating supply current
TLC7733QPE4 Applications
There are a lot of Texas Instruments TLC7733QPE4 Voltage Supervisors applications.
- Sensitive sensors
- Precision measurement
- Automotive permanent magnet synchronous motors
- Military electronics
- Detection of phase loss
- External alarm
- Efficient information transmission
- Set top box
- Detection of phase sequence
- Magnetic resonance imaging
