TLC7733QPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 525mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC7733 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 16μA |
| Power Dissipation | 525mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 2.86V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.86V |
| Overvoltage Threshold | 3V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC7733QPWRG4Q1 Overview
Power management is mounted through 8 terminals. Tape & Reel (TR)-packaging is used. For your reference, this IC power includes a list of 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find 8-TSSOP (0.173, 4.40mm Width) functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. IC management conducts at a voltage of 2.7V. IC management is possible to find a succession of 1 voltages that have been checked. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 8 pins are located on this power management. There are 8 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2V volts. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supervisor's supply current is specified to 16μA. To find similar IC managements from the manufacturer, you can always search by TLC7733. At the most, voltage supervisor can work with a supply temperature of 16μA. As you may know, this PMIC comes from the well-known Automotive, AEC-Q100 series product line.
TLC7733QPWRG4Q1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
16μA operating supply current
TLC7733QPWRG4Q1 Applications
There are a lot of Texas Instruments TLC7733QPWRG4Q1 Voltage Supervisors applications.
- DVR
- Computer applications
- Functional modules
- Consumer electronics
- Automotive permanent magnet synchronous motors
- DSP
- Dash board
- Important electronics for automotive protection
- Display equipment
- Electrical fire monitoring system
