TLD1312ELXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | Automotive, LITIX™ |
| Tolerance | 7% |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Tin (Sn) |
| Applications | Automotive |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 3 |
| Max Output Current | 120mA |
| Max Supply Voltage | 40V |
| Output Current | 60mA |
| Max Supply Current | 1.5mA |
| Max Output Voltage | 40V |
| Topology | Boost |
| Min Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 120mA |
| Min Output Voltage | -1V |
| Internal Switch(s) | Yes |
| Screening Level | AEC-Q100 |
| Dimming | PWM |
| Number of Segments | 9 |
| Voltage - Supply (Min) | 5.5V |
| Nominal Input Voltage (DC) | 18V |
| Height Seated (Max) | 1.7mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLD1312ELXUMA1 Overview
To save board space, it uses the 14-LSSOP (0.154, 3.90mm Width) Exposed Pad package. 3 outputs are designed into LED drivers.We are using Surface Mount as the mounting method.With high efficiency and reliable performance, it emerges as a Linear.The LED driver has the capability of operating at a temperature of -40°C~150°C TJ.A number of benefits are available to Automotive.It operates with 14 terminations.This configuration is built upon 14 pins.A voltage supply less than 5.5V could result in undetermined failures.9 segments exist.Surface Mount is mounted on it.The voltage of 40V is acceptable.This device requires a minimum voltage of 5.5V volts.It is possible to provide high efficiency when the maximal supply current is less than 1.5mA.In this case, the load can only be supplied with 60mA current.Even when operating at a maximal output current of 120mA, it is capable of delivering all the benefits of a LED driver.LED drivers belonging to the Automotive, LITIX? series are used in a wide variety of applications.The output voltage should not be in excess of 40V.-1V is the minimal voltage it outputs.
TLD1312ELXUMA1 Features
Available in the 14-LSSOP (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~150°C TJ
Supply voltage of 18V
TLD1312ELXUMA1 Applications
There are a lot of Infineon Technologies TLD1312ELXUMA1 LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- A- lamps
- Replacement lamps
- Dimmable LED for vehicle interiors
- LED Lightings for Industrial Equipment
- Medical surgery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- White LED Backlight for portable equipment
- Constant Voltage Power Source for portable equipment
- High-end retail lighting
