TLD1314ELXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive, LITIX™ |
| Tolerance | 7% |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Tin (Sn) |
| Applications | Automotive |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Max Output Current | 120mA |
| Max Supply Voltage | 40V |
| Output Current | 60mA |
| Max Supply Current | 1.9mA |
| Max Output Voltage | 40V |
| Min Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 120mA |
| Min Output Voltage | -1V |
| Internal Switch(s) | Yes |
| Screening Level | AEC-Q100 |
| Number of Segments | 9 |
| Voltage - Supply (Min) | 5.5V |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 18V |
| Height | 1.7mm |
| Length | 3.9mm |
| Width | 2.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLD1314ELXUMA1 Overview
On the board, there is also a 14-LSSOP (0.154, 3.90mm Width) Exposed Pad package that saves space.These LED drivers have 3 outputs.In order to mount the led light driver, Surface Mount is used.With high efficiency, it appears as a Linear.It is possible for the led driver ic to operate normally at -40°C~150°C TJ.There are considerable benefits for Automotive.There are 14 terminations that are designed to operate with it.The LED light driver has a base configuration of 14 pins.Failures may occur if the voltage supply is below 5.5V.Segments counted are 9.There is a device mounted on the Surface Mount.An acceptable maximum value for the supply voltage is 40V.Furthermore, it can be classified as Display Drivers based on its characteristics.A minimal input voltage of 5.5V is required for it to operate.In order to maintain maximum efficiency, the supply current cannot exceed 1.9mA.60mA is the maximum current the load can handle.A LED driver that operates at 120mA output current provides all the benefits of a LED driver.LED drivers from the Automotive, LITIX? series are essential components for a wide variety of products.40V should be the maximum output voltage.The minimal voltage it outputs maintains at -1V.
TLD1314ELXUMA1 Features
Available in the 14-LSSOP (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~150°C TJ
Supply voltage of 18V
TLD1314ELXUMA1 Applications
There are a lot of Infineon Technologies TLD1314ELXUMA1 LED Driver ICs applications.
- Other Electronic Devices
- Industrial LED Lighting: Image Recognition Devices
- LED headlights
- Linear fluorescent
- Amusement Machines
- Museum lighting
- Street lighting
- Down lights
- Panel lighting
- A- lamps
