TLD1315ELXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, LITIX™ |
| Tolerance | 7% |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Tin (Sn) |
| Applications | Automotive |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 3 |
| Max Output Current | 120mA |
| Max Supply Voltage | 40V |
| Output Current | 60mA |
| Max Supply Current | 1.5mA |
| Max Output Voltage | 40V |
| Topology | Boost |
| Min Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 120mA |
| Min Output Voltage | -1V |
| Internal Switch(s) | Yes |
| Screening Level | AEC-Q100 |
| Dimming | PWM |
| Number of Segments | 9 |
| Voltage - Supply (Min) | 5.5V |
| Nominal Input Voltage (DC) | 18V |
| Height Seated (Max) | 1.7mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLD1315ELXUMA1 Overview
Save board space with 14-LSSOP (0.154, 3.90mm Width) Exposed Pad package. LED drivers designed using this technology use 3 outputs.To mount, use Surface Mount.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.At -40°C~150°C TJ, the led driver is capable of operating.Automotive has significant advantages.It operates with terminations of 14.It is configured with 14 pins as its base.If the voltage supply is less than 5.5V, undetermined failures will occur.A total of 9 segments are estimated.There is a mounting of it by Surface Mount.An acceptable maximum value for the supply voltage is 40V.The minimal input voltage is 5.5V.When the maximum supply current is below 1.5mA, the device can deliver high efficiency.It is possible to supply the load with 60mA current.When operating with a 120mA output current, the LED driver delivers all the benefits.LED drivers from the Automotive, LITIX? series are essential components for a wide variety of products.Voltages above 40V should not be allowed.A minimum voltage of -1V is maintained by its output.
TLD1315ELXUMA1 Features
Available in the 14-LSSOP (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~150°C TJ
Supply voltage of 18V
TLD1315ELXUMA1 Applications
There are a lot of Infineon Technologies TLD1315ELXUMA1 LED Driver ICs applications.
- Scanners and Handy Terminals
- Auxiliary lights for on-vehicle cameras
- LED Lightings for Industrial Equipment
- Portable lighting
- Stage Lighting and Signage
- Gallery lighting
- Sports Facility Lighting
- Linear fluorescent
- Panel lighting
- LED headlights
